These Carver clamps come in five designs: T-slot, C-style, edge grip, buttress, and
These Carver clamps come in five designs: T-slot, C-style, edge grip, buttress, and bar style. The T-slot clamps provide quick height adjustment and positive holding, applying 100% of the screw force onto the workpiece. C-style Carver clamps consist of frame and moveable jaw for ruggedness. The edge grip low profile clamps apply horizontal and vertical force against the workpiece to pull it down onto the worktable and clamp it into position. They are designed for use with T-slot tables (or bolted to a plate) and allow maximum cutter access to the workpiece surface.
Buttress-style clamps are designed to secure thin or low-profile workpieces and are available in three capacities from 2,875 to 17,600 lb (1300 to 8000 kg) holding force. The bar style clamps are made from high strength steel for use where a large clamping capacity is required. The jaws may be reversed to provide spreading action or several jaws may be used on a single bar for fixturing and positive component location and clamping.
De-Sta-Co Industries, A Dover Resources Company, 2121 Cole St, Birmingham, MI 48009 Phone: (248) 594-5600 Fax: (248) 644-3929