Product/Service

ER Bearing Nuts

Source: Techniks, Inc.
Friction bearing nuts will increase the clamping pressure on the shank of the tool up to 25% compared to standard clamping nuts. The bearing reduces the friction between the nut and the collet therefore creating more down force on the collet.

This nut is recommended for use with high demand drilling, milling and tapping. The collet must be snapped into the nut for proper assembly.

Available for ER25, 32, 40 toolholders.

Friction bearing nuts will increase the clamping pressure on the shank of the tool up to 25% compared to standard clamping nuts. The bearing reduces the friction between the nut and the collet therefore creating more down force on the collet.

This nut is recommended for use with high demand drilling, milling and tapping. The collet must be snapped into the nut for proper assembly.

Available for ER25, 32, 40 toolholders.

Techniks products are available exclusively through its distributors and are backed by a 100% satisfaction guarantee. Ask your distributor for a Techniks catalog or call (800) 597-3921 to find the distributor near you. For more information visit Techniks on-line catalog at: www.techniksusa.com

TECHNIKS – Built For Speed.

Techniks provides CAT, BT, and HSK tool holders and accessories throughout North America.