News | June 21, 2018

Iscar Tor6Mill Multifunction Cutters Feature Four Different Insert Geometries

Iscar has released the Tor6Mill milling cutters and inserts, which are suitable for applications in the die and mould, turbine blade, and general engineering industries.

The cutters are available in three configurations: TR6 ER endmills in a diameters of 16 to 32 mm; TR6 ER-M interchangeable milling heads with FlexFit adaptation in a diameters of 20 to 42 mm; and TR6 FR face mills in 52, 66, and 80 mm dia.

The tool diameter does not change because all insert corner radii are designed to enable undercutting. They feature coolant holes directed to every cutting edge, and the cutter body includes a protective, polished coating for uninterrupted chip flow and protection from corrosion and wear.

The inserts are produced from the company’s Sumotec carbide grades and are available in numerous cutting geometries, including:

  • TR6 TNCU/MU 1004 double-sided insert with six round cutting edges, available in 0.5- to 3.0-mm corner radii.
  • TR6 TNMT 1004 single-sided insert with three cutting edges for 90-degree shoulder and face milling.
  • TR45 TNMT 1004 single-sided insert with three 45-degree cutting edges for general use and for face and chamfer milling.
  • TRFF TNMT 1004 single-sided insert with three cutting edges for fast-feed machining.
  • TR6 TNCU/MU 0702 double-sided, ground inserts with six cutting edges, available with 0.5-, 1.0-, and 1.5-mm corner radii.
  • TR90 TNMT 0702 single-sided insert with three cutting edges for 90-degree shoulder milling.
  • TRFF TNMT 0702 single-sided insert with three cutting edges for high-feed machining.

SOURCE: Iscar Tools