Lyndex Adds E348 and E458 To Line Of Quality Presetters
For rigidity and accurate performance both versions include a ground granite column and base, double recirculating ball bearing guides and double prism special guideways. Both presetters feature a traveling column system and an interchangeable rotating spindle. They also feature the Panvision Color Camera System. Panvision's color monitor is 5.6", 320 x 240 STN color. The screen area at 20 times magnification is 6.4 mm x 4.8 mm. When activated, a two times hardware zoom gives a full screen image of 3.2 mm x 2.4 mm (40 times magnification). Measurements are shown on-screen in order to quicken setup time. Cross hair lines can be drawn on-screen at any known positions. Screen colors of the cutting tool are uniquely designed to change from red to green in confirmation of correct tool setting. With Panvision, full-screen automatic measurement, with a 5 µm resolution is possible.
Other features include motorized axes movement, with continuous micro fine adjustment, management of 99 machine tool origins, long-term data storage (up to 10 years even after a power failure) and a 21 key icon driven keyboard. Also included with the E348 and E458 are 2 serial ports built in for both printer and PC data input/output. Optional Gamma Tool Software enables toolholder offsets to be transmitted to the machine tool controller.
The measuring range for the E348 for the X and Z axes are 190 mm (ø380 mm) [7.48" (ø14.96")] and 480 mm [18.89"] respectively. The measuring range for the E458 for the X and Z axes are 240 mm (ø480 mm) [9.44" (ø18.89")] and 480 mm [22.83"] respectively.
Lyndex Corporation, 3160 Commercial Ave., Northbrook, IL 60062. Tel: 800-543-6237; Fax: 847-509-2909.