Product/Service

Power Coat ER Collet Nuts

Source: Techniks, Inc.
The "Power Coat" nut feaures a permanent, space-age coating that increases clamping pressure up to 75% compared to an uncoated standard ER nut.

More holding power reduces the chance of spinning the shank of the tool inside the collet, which can cause premature failure of the collet.

"Power Coat" nuts also have an eccentric ring that holds the collet inside the nut when turned upside down. They are balanced for high-speed operations.

Available for ER11, 16, 20, 25, 32, 40, and 50 toolholders

The "Power Coat" nut feaures a permanent, space-age coating that increases clamping pressure up to 75% compared to an uncoated standard ER nut.

More holding power reduces the chance of spinning the shank of the tool inside the collet, which can cause premature failure of the collet.

"Power Coat" nuts also have an eccentric ring that holds the collet inside the nut when turned upside down. They are balanced for high-speed operations.

Available for ER11, 16, 20, 25, 32, 40, and 50 toolholders.

Techniks products are available exclusively through its distributors and are backed by a 100% satisfaction guarantee. Ask your distributor for a Techniks catalog or call (800) 597-3921 to find the distributor near you. For more information visit Techniks on-line catalog at: www.techniksusa.com

TECHNIKS – Built For Speed.

Techniks provides CAT, BT, and HSK tool holders and accessories throughout North America.