Seco Re-Engineers Perfomax To Further Optimize Drilling Performance
Perfomax flutes feature larger helixes and center chip areas along with smoother chip flute exits and Seco’s engineered wave pattern that minimizes contact between chips and flute surfaces. The drill generates shorter chips that evacuate quickly and easily to significantly reduce the risk of chip jamming for higher application security.
For up to 140 percent longer drill body tool life, Seco laser hardens the fronts of Perfomax’s flutes. A hardness of HRC 60 allows the drill to withstand chip erosion for much longer periods of time. The re-engineered design of the Perfomax also creates a bigger radius at the bottom of the drill’s insert pockets for added rigidity.
The DS2050 and DS4050 insert grades for Perfomax are especially well suited for heat resistant materials like titanium and titanium alloys. The grades enhance productivity and extend tool life thanks to recently developed free-cutting MP and MC geometries. DS2050 are inserts for periphery cutting and DS4050 are those for center cutting.
Perfomax drill bodies are available in diameters ranging 15 mm to 59 mm (0.594” to 2.375”); in length to diameter ratios of 2xD, 3xD, 4xD and 5xD; and in most spindle interfaces.
For more information on Perfomax, please contact a local Seco representative or visit our Perfomax product page at https://www.secotools.com/#article/580.
Source: Seco