Welcome to the VertMarkets Safety Training Network: OSHA
VertMarkets has partnered with recognized training providers to bring you the most comprehensive network of safety educational programs. As a VertMarkets subscriber you will receive a 5% discount on the distance learning programs below.
Simply use the coupon code: VertMarkets.
OSHA/Safety:
OSHA Concrete and Masonry Construction (2 hours)
This online course is a brief review of Concrete and Masonry Construction Regulations as posted under Subpart Q, Part 1926, from OSHA's Safety and Health Regulations for Construction.
OSHA Cranes, Derricks, Hoists, Elevators & Conveyors (3 hours)
This online course is a brief review of Regulations regarding cranes, derricks, hoists, elevators, and conveyors as posted under Subpart N, Part 1926, from OSHA's Safety and Health Regulations for Construction.
OSHA Demolition (1 hour)
This online course is a brief review of Regulations regarding Demolition as posted under Subpart T, Part 1926, from OSHA's Safety and Health Regulations for Construction.
OSHA Electrical Regulations (5 hours)
This five hour online course is a brief review of Electrical Regulations as posted under Subpart K, Part 1926, from OSHA's Safety and Health Regulations for Construction.
OSHA Fatal Accidents & Prevention (2 hours)
This online course is developed from OSHA accident reports and is taken directly from OSHA's Fatal Facts. It covers numerous types of accidents.
OSHA Fire Protection & Prevention (4 hours)
This four hour online course is a review of OSHA's Fire Prevention and Protection Regulations taken directly from Subpart F, Part 1926, Safety and Health Regulations for Construction.
OSHA Tools- Hand and Power (3 hours)
This online course is a brief review of Government Regulations regarding Tools- Hand and Power as posted under Subpart I, Part 1926, from OSHA's Safety and Health Regulations for Construction.
OSHA Underground Construction (4 hours)
This online course is a brief review of Government Regulations regarding Underground Construction, Caissons, Cofferdams and Compressed Air as posted under Subpart S, Part 1926, from OSHA's Safety and Health Regulations for Construction.
OSHA Welding and Cutting (2 hours)
This two hour online course is a brief review of Government Regulations regarding Welding and Cutting as posted under Subpart J, Part 1926, from OSHA's Safety and Health Regulations for Construction.
Workplace Safety: How to Avoid Hazards (1 hour)
This 1-hour online course is a refresher course on workplace safety. This course touches on well-known safety precautions as well some new precautions you may not have thought about.
Safety - An Introduction (1 hour)
While this 1-hour online course is not a comprehensive course in safety, it serves to introduce the student to some common hazards and preventative methods.
Excavation Safety and Shoring/OSHA (4 hours)
This 4-hour online course will give the student a basic understanding of OSHA approvable shoring, sloped sidewall trenches, and safety measures for excavations. As an engineer or competent person you will learn valuable skills in identification of site conditions, selection of shoring, construction, and inspection.
Automotive Turn Signal & Hazard Flashers - Federal Requirements (1 hour)
This 1-hour online course covers the National Highway Traffic Safety Administration, Department Of Transportation Federal Motor Vehicle Safety Standard 108 (FMVSS108) and how it applies to turn signal and hazard warning flasher modules.
Risk Management:
Risk Management for the Design Professional: Advanced (5 hours)
This 5-hour online course forms a basis of risk management workshops and outlines key areas for discussion (with real-world examples) that have significant impact on risk management from a design professional's perspective.
Risk Management for the Design Professional: Basic Principles (2 hours)
The written material presented in this 2-hour online course presents basic principles of risk management for design professionals.
Risk Management for the Design Professional: Intermediate (3 hours)
The written material presented in this 3-hour online course forms the basis of risk management workshops presented by J. Kent Holland, Esq., Director of Risk Management Services for the design professional liability unit of Arch Insurance Group, Inc., and of Counsel with the construction law firm of Wickwire Gavin, P.C.